設備名稱：自動液壓模架 Name: Automatic Hydraulic Mould Carrier 型號：HC-M2000/14型 Type: HC-M2000/14 數量：1臺 QTY: 1 sets 電器控系統: 1套 Electric control system: 1 sets 設備技術參數明細/technique parameters list 模板鎖緊面尺寸 2100mm*1400mm Plate size 2100mm*1400mm 閉合高度 300-900mm 可調 Height of Closing 300-900mm adjustable 開模角度 0-60° Upper plate tilting to open 0-60° 鎖模力 200kn Closing force 200KN 開模力 70kn Opening force 70KN 下模板行程 200mm Lower plate stroke 200mm 開、閉模時間 12s Complete opening/closing time 12s 模具固定栓 DIN 650-18H12-(16) Tools fixation slots DIN 650-18H12-(16) 模具溫度 50°-80° Mould temperature 50°-80° 控制電壓 DC24V Control power DC24V 生產流程說明： Producing process: - 液壓系統固定在地面上，驅動1臺模架開閉動作 Hydraulic system is fixed on the floor, which is used to drive mould carrier opening and closing. - 鎖模流程：整理模具-噴脫模劑-安全鉤脫鉤-合模-鎖模缸啟動鎖模-液壓缸頂出模架-閉模灌注-熟化-開模 Mould locking process: clean mould-spray release agent-safety hook release-close mould-cylinder start-closing inject-curing-open 灌注方式：閉模式灌注 Injection way: closing injection 控制操作系統：一套 Control system: 1 set 采用西門子公司PLC中央控制，OP操作系統具有強大的功能菜單，顯示壓力、時間、溫控、生產參數設定、安全監控、警示等。 PLC adopts Germany SIMENS; touch screen has powerful menu function, which can display the pressure, time, temperature control, producing parameters, safety monitoring, alarm and so on. 模具加溫設備：1臺 Heating equipment: 1 set - 功率12KW*1臺通過水循環分別給2套液壓模具加溫及溫度控制 1 set of 12 kw cycle water to heat the mould and control the temperature. - 可分別實行獨立溫控 Control the temperature separately. 設備安全保護系統： Safety system: - 整套模架升降開閉由液壓系統自動完成 The mould carrier’s lift, opening and closing are finished by hydraulic system. - 模架配有防脫落機械保險裝置 Anti fall mechanical safety device. - 模具兩側裝有紅外線光柵安全感應器 There are red-ray barrier sensors on the both 2 sides of the mould carrier. - 設備設有急停及安全自動警示裝置 Emergency stop and alarm system - 設備配有防護欄 The equipment has light barriers. 惠州市和成機械設備有限公司 188 9634 6260
